Making Radial Motor RC Airplane. Diy RC Model Airplane.
How to make remote control radial motor airplane. Diy radial motor with 3 brushed motors
Needs:
30A Brushed ESC: http://rcmove.ru/w94 2 pcs 9gr
Micro servos: http://rcmove.ru/w95
7.4V Lipo (2S): http://rcmove.ru/w96 OR http://rcmove.ru/w97
3 Channel or over Radio Control: http://rcmove.ru/w98 OR https://tinyurl.com/3ep6y9uz
Hot melt Glue Gun: http://rcmove.ru/w99
Servo control horn: http://rcmove.ru/w9a
Adjustable Linkage stopper (Easy Link): http://rcmove.ru/w9b
Gold Connectors 3.5mm (Motor u0026 ESC connections): http://rcmove.ru/w9c
Wheel stopper: http://rcmove.ru/w9d
Lipo Battery Charger: http://rcmove.ru/w9e Or LiPo Battery Balance Charger: http://rcmove.ru/w9f
3 x DC 180 Motors (39000 RPM): http://rcmove.ru/w9g
3 pcs 5mm kraft foamboard 1 pcs 3mm kraft faomboard Radial Motor STL Files: https://drive.google.com/file/d/1CoIprIWxMIVNvaiVO-NZPi8i_hjhaiOl/view?usp=sharing
Diagrams: https://www.rcpano.net/2021/10/24/making-radial-motor-airplane-diy-rc-airplane/
Technicial Specifications: Lenght: 65 cm Wing span: 111 cm Wing area: 16.83 dm2 Flight weight: About 645 gr Center of gravity: 5.6mm – 6.5mm from the front of the wing
Required control system: Min. 3 channels, 2 micro servos (9gr) Suitable battery: 7.4V 1500Mah – 1800Mah Lipo battery Suitable motor: DC 180 Brushed Motor (3 pcs) Suitable propeller: 2 Blade 10x6
Ok, so I am going to take one last jaunt into the 3D printing arena here in association with Eclipson Airplanes regarding finding the best material to print your aircraft
