Flying tractor, aerobatic model, aileron trainer, fire extinguisher, towing model, Funflyer, Immerdabeiflieger, the Honk combines many features on itself. That's what makes him so versatile. Anyone can build a honk, all you need is the free download plan and some finishing tips.
The idea behind the Honk was a model in agricultural aviation optics with a good span of one meter.
It should be able to fly with a standard equipment, since this is usually somehow present, so with a motor around 80 grams (g) weight, a 3s LiPo with about 2,200 milliamp hours (mAh) capacity and popular 9-g servos. The model should be fully aerobatic and 3D-capable, but also suitable for advanced beginners and poorly mowed meadows with limited airspace.
The goal was also a weight of well below 1,000 g. I wrote in the specification sheet that Honk should be able to pull up to 500 g of weight for F-tow gliders.
And he should be fun in any weather conditions.
Electronics:
XXD A2212 1400KV Brushless Buy: Racerstar BR2212 1400KV 2-4S Buy: XXD 2212 Motor+ZTW Beatles Buy: RC Airplane DIY Set Buy: HTIRC Hornet Series 30A Buy: FMS Predator 30A Brushless Buy: Favourite FVT Swallow Series Buy: SG90 Mini Gear Micro Buy: KittenBot® 23x12.2x29mm SG90 9g Buy: 4 X SG92R Mini Buy: GEMFAN GF 8040 8060 Buy: Dynam 8x6 8060 3 Buy: DYS E-Prop 8 Buy: 1pc KMP 8060 8x6E Buy: ZOP Power 11.1V 2000mah Buy: ZOP Power 11.1V 2200MAH Buy: XF Power 11.1V 2200mAh Buy: Gaoneng GNB 11.1V 2200mAh Buy:
Justin skimmed over a small but important step! The GoPro power cable needs to be soldered into the 5 volt power source going into the FPV video transmitter on the drone
