This RC Mustang P-51D is fast, even with just 50% throttle, I was trying hard to not hit a tree when flying it. I should add flaps for slower landing, but the time for this project is limited so I'll leave it to you to improvise with this plans, good luck and have a good building time.
Specs :
Wingspan 1100mm / 43.3 inches
Flying weight: 1060 grams/ 37.4 oz
Wing loading: 47.5 gram/dm2 — 15.6 oz/sq.ft.
Wing cube loading: 10
Wing Area: 22.3 dm2 / 346 sq.in.
CG: 4 cm
Materials:
1. 5mm Depron/ Polyfoam
2. 3mm + 7mm Plywood
4. 0.3mm + 0.5mm Mica Plastic
5. hot glue, UHU glue, CA glue
6. packing tap/wax paper/ laminating film
This airplane was made of 5mm and 10mm depron foam , balsa wood and plywood, carbon fiber rods for the wings mount , white vinyl and all the stickers were cut in a plotter machine
In this video we are going to learn about RC -electronics basics and part 2 will be the making of RC aeroplane if this videos useful consider subscribing to our channel
