How To Make Twin DC 180 Motors RC Airplane. DIY RC Plane
2 x DC 180 Motors. How To Make Dual Motors RC Airplane At Home.
Flight performance is very good. A model aircraft with very stable landing and take-off.
You Need:
20A ESC
4 x 9gr Micro servos
2S 7.4V 800Mah LiPo Battery
4 - 6 Channels Radio Control
LiPo Battery Balance Charger:
OR
Hot melt Glue Gun:
Pushrods:
2mm Rod For Landing Gear:
Canopy Hatch Lock link:
Servo control horn:
Adjustable Linkage stopper (Easy Link):
Gold Connectors 3.5mm (Motor & ESC connections):
30mm Wheel:
Wheel stopper:
Y extension cable:
Lipo Battery Charger:
2 x DC 180 Motors (39000 RPM)
or bit.ly/2L62JqC
2 x 108mm Propellers (CW&CCW): bit.ly/33MPMbY
Kraft foam board (50x70 plate)
Mini Bench Vice Clamp:
Approximate flight weight: 410 gr
CG: 33-37mm back from the leading edge of the wing, measured at side fusulage
Taking off with a new plane for the first time? Here are some great tips from Nate of TheRcSaylors explaining a preflight checklist for most "normal" wing type rc airplanes! If you have...
The first step is gathering the matirials 1x 80cm andd 18mm by 18mm wide strong andd stiff wooden stick then you need a 5cm wide 35cm long multiplex board cut in 3 ddifferent lengths 2 times 5 by...
