As I have had many requests, I’m selling my plans for my md80 depron airliner, the wing is held with magnets for easy lipo changing,
it is powered by two 40 mm brushless edfs, two 20 amp speed BL controllers, powered by 3 cell turnigy lipo.
It requires 5 servos, one for ailerons, 1 for elevator, 1 for rudder and steering, and 2 for the retracts if fitting them
It is 1129mm long, with a 841mm wingspan it weighs 300g without lipo,
It is a simple design to build, fuselage is made from 6mm depron with 3mm sheeting, the wing is 3mm depron with balsa spars.
The plane requires
(**edit the links where removed as The hobbyking website has had a shake up*)
1x 6mm sheet of depron
3x 3mm sheets of depron
1x 300mm x 200mm sheet of lite ply
1 x sheet of 1/8" (3mm) balsa
3 x push snakes
1x 2mm carbon rod
2x 40mm edfs
2x 20a speed controllers
3x gws blue retracts (optional)
3x minimum 9g servos/ 5 with retracts
8x 6 x 3mm magnets for the wing retention,
You will receive pdf, dwg and dxf so you can print the plans and have parts cnc/laser cut.
The cost is £5 GBP / 7 USD payable by paypal to brett1984@hotmail.co.uk
The plans will be emailed within 24 hours
If you purchase the plans and build the model and post a flight video i will refund you the cost of the plans.
No RC plane is safe around Test-pilot Tim (grab your popcorn) and in this video you get 8 minutes of uncut nitro terror as he hurls the Kyosho Calmato around the sky in an attempt to break it
Petite revue d`un drone moto super sympa , maintien d`altitude , deux modes , donc : moto au sol et mode vol drone classique , super cool au final , attention il existe des version en...
