Eachine EV100 Review

:  RC Plane Poster



Eachine EV100 review. The Eachine EV100 FPV goggle review are some crazy good goggles. For the price I am actually blown away.

They are not as good as fatshark Dominator or Aomway commanders, BUT they are SUPER CHEAP and finally we have an entry level option for PILOTS wanting to do FPV drone racing. They have a FAN, OSD, Diversity (only antenna though) But they still need dvr and better antennas. 

 

 

Specification Eachine EV100:

  • Frequency : 5.8G 5333Mhz-5945Mhz
  • Sensitivity : <=-93dB
  • Antenna Impedance : 50Ω
  • Antenna Gain : 3dBi
  • Antenna Connector : RP-SMA
  • Video Formate : NTSC/PAL
  • Support AV IN/OUT
  • Support Focal Length/Brightness/Contrast Adjustment
  • Suport Firmware Upgrading
  • Power Input : 7.4V
  • Low Voltage : 6.8V
  • Battery : 2S 7.4V 1000mAh
  • Charging : USB Cable(not included)
  • Working Temp. : -10℃-+40℃
  • Size : 165mm*76mm*30mm
  • Weight : 221g (with battery 57g and antenna 13g)
  • Package Weight : 400g

Display

  • Resolution : 720*540
  • FOV : 28° diagonal
  • IPD : 58-68mm
  • Ratio : 4:3(native)/16:9 adjustable
  • Focal length adjusting: under 400 degree of myopia and hyporopia 150 degree

Features

  • Support AV Input and Output
  • Support External HDMI to AV Module
  • Support External DVR module
  • Single receiver with Dual Antennas, enhance the reception and stable performance.
  • With Fan, can defog the glasses for good visual experience.
  • Adjustable focal length,allows pilots under 400 degree myopia view directly via naked eye
  • Adjustable IPD 58~68mm
  • Auto Search function, can auto search all frequencies and select the channel of stongest signal.
  • Has 3 Racing Modes : 4/6/8 pilots. 60-80MHz interval between adjacent channels greatly decrease interference.
  • Has Debug Mode, requires a corresponding VTX which support pitmode and extra frequency 5300MHz
  • Support for 3D video
  • RF Analyzer
  • Dual axis head tracking (gyro, inertial and compass)
  • OSD or outer LCD/OLED display of receiver CH&Band and other settings.
     

Package Included

  • 1 x Eachine EV100 5.8G 72CH FPV Goggles
  • 1 x 7.4V 1000mAh Battery
  • 2 x RP-SMA 3dBi Antenna
  • 1 x User Manual

Other links I talked about:

FYI these are affiliate or campaign links and the above product was sent for free. If you dont like it, feel free to just google search the product or store and get the link that way. But if it doesn’t bother you these links help support the channel and also help vendors track the impact of my videos.


Similar Video:

Review BD-5 RC Plane
Review BD-5 RC Plane



RGT Adventurer 1/24 4WD Crawler V2 Full Review  JJRC W01 J3 Piper Cub RTF RC Model Flight Test Review  Mini 3D RC Plane | Review and Flight  XXD165 FLYING MOTORCYCLE MOTO VOLANTE REVIEW ,TEST  WLToys XK A160 Skylark Flying Model Piper Cub Flight Test Review  IT’S a BEAST! - ZLRC BEAST SG906 4K DRONE - REVIEW & FLIGHTS  Mini Drone HX750 Drone Unboxing Testing And Review  New 1000Rs Drone!! Eachine E010 RC Quadcopter Unboxing & Review!  Eachine Mini F-22 Raptor - Manual Mode Progression  Sharp Image Drone D-4 Review  Drone Eachine Novice-II V2.0  Volantex Saber 920 Review • 3D EPO RC Plane Build Notes and Maiden Flight  
Rating: 0 Votes: 0 12341 view
Comments (0)

No comments yet. Yours will be the first!

How to make video

DIY How to Make a Home Made Rc Plane

RC Plane Poster  0  2656
Diy how to make a rc plane

 


How to make an RC Plane SPAD - ( by Rahul Arya & Aidren Quental )

RC Plane Poster  0  3874
How to make an RC Plane at home in low budget, with minimal requirements.

 

 


How to make Hawker Hurricane RC Plane DIY

RC Plane Poster  0  2734
Complete Build u0026 maiden flight DIY video tutorial How to make handmade Hawker Hurricane Mk

 


How to build a RC Airplane at home

RC Plane Poster  0  2563
How to build a RC Airplane at home  

 


Hangar Log: Eachine EG16 Wing God Review

RC Plane Poster  0  2784
Detailed review of the Eachine EG16 `Wing God` GPS quadcopter

 

 


3D Printing R/C Airplanes - is it worth it?

RC Plane Poster  0  3632
So, after getting my CR-10 printer working acceptably I have spent a couple hundred hours printing R/C airplane parts and tuning