The plans can be used to build either a Saber or MIG park flyer jet. The power for this model comes from a propeller mounted inside the fuselage to form an affordable and light weight alternative to electric ducted fans.
Three sheets of 3mm and 1/8 sheet of 6mm foam sheeting is needed to get started.
The plans are ink jet printed on bond paper and is color coded to help identify the patterns for either model. The plans come with minimum folds and rolled in a box with the plastic parts you choose.
About the plane: Plane weight 310 grms, Motor 2600 KV, Prop 6 inch (use of prop saver recommended) , Wing span 95 cm, Chord length 16 cm, Battery 360 mAh 7~8 Volt Lipo battery (you can use 1000...