How to retrofit your foam 3D RC plane to make it (almost) crash-proof
You can retrofit your foam 3D RC plane to make it almost crash-proof by several easy modifications. Put a disk of dense foam rubber between the motor and motor mount. The foam should be approximately 5/8 inch (15mm) thick. Put holes in the foam rubber and re-attach the motor using zip ties. Reinforce the front of the fuselage with 4 popsicle sticks. Use packing tape with fibers to reinforce the fuselage.
The BushMule is back! Stuart goes going over all the changes in V2 in this official flight review! Learn about its history, what`s new with the Avios PNF BushMule V2 Twin-Motor Sports/STOL Airplane...
Stephanie flew her Meteor and Bird Of Time, Roddy flew his RC digger, I few the E Sky Albatross and everyone had a jolly good time with the RC plane of their choice on what was the hottest day of...
