3D printed RC Shark , 1/8 scale - 2nd prototype test flight
More than 10 minutes flight with the 2nd prototype 3D printed RC Shark, 1/8 scale, 990 mm wingspan, 940 g take-off weight. Test flight with recommended configuration: Turnigy 2200 mAh / 25-35C battery, Turnigy 3530/14 1100KV brushless, 9x6 two-blade propeller, 30C ESC.
Music: Drifter by Split Phase (freemusicarchive.org)
It`s been a couple of weeks since I`ve last been out flying, so it was nice to get out and take advantage of a favorable wind and fly one of my old school slope soarers
There was a stiff breeze today at the field and a lot of thermal turbulence so I thought I`d see how well the little DIY Sub-250 gram FPV model I built from foamboard would handle the conditions