The delta wing platform makes for a speedy and maneuverable model. Build light for a floater, or add a powerful motor for more excitement! Great for smaller fields.
The box fuse and KFm4 wing ease the construction process. The EDF unit can be placed in a variety of positions throughout duct to achieve correct center-of-gravity. For best performance, ensure duct is clean and free of obstructions.
MODEL STATS
Wingspan: 22″
Length: 33.5″
Airframe Weight: 12.9oz. (Painted, w/o Battery)
Flying Weight: 17.5 — 20.4oz. (depending on battery)
Servos: 3 x 5g or 9g (2 for elevons, 1 for rudder)
Primary Build Material: 5mm thick “Dollar Store” foam board (Readiboard) with paper removed. 6mm foam can be used with adjustments to plan for additional thickness. "KFm4" airfoil and Box Fuse construction for a fast build
Electronics:
64mm Ducted Fan EDF Buy: , QX-Motor 64MM 5 Blades Buy: , Racerstar 64mm 5 Blades Buy: , HTIRC Hornet Series 30A Buy: , FMS Predator 30A Brushless Buy: , Favourite FVT Swallow Series Buy: , SG90 Mini Gear Micro Buy: , KittenBot® 23x12.2x29mm SG90 9g Buy: , 4 X SG92R Mini Buy: , ZOP Power 11.1V 1600mAh Buy: , ZOP Power 11.1V 1800mAh Buy: , URUAV 11.1V 1800mAh 75C Buy: , Giant Power Dinogy 1800mAh Buy: ,
Ok, so I am going to take one last jaunt into the 3D printing arena here in association with Eclipson Airplanes regarding finding the best material to print your aircraft
Today we made a flying model of the battle bus from fortnite! It ended up being more of a blimp rather than a hot air balloon but propane regulators at that size would be hard to find, nevermind...
