Hello every one ,back to my channel. Today`s we will Make RC SUPER MUSHAK scale model DIY.
You can build your self Super Mushak model by following tutorial on this vedio. Start from foam sheet into flying the plane with brushless out runner motor ,electronics and control by radio.The dimensions and colour is also explain in this vedio.
Plan Link : https://bit.ly/2XPEuWt
Technical Data : 1. Length: 34 inches 2. Wingspan: 48 inches 3. Flying weight: 1 kg 4. Wing area: 408 sq.in Electronics - Racer star 2217 1250 kv motor - ESC 30A - 3 Cell Lipo Battery 2200mah - 5 Servos 9 gr plastic gear - Propeller : 10×4 / 11×5 - Radio : 4 Channel 2.4Gz Materials 1: 3/4 Inch thermocole foam 2: 3 mm plywood 3: 3 mm steel wire for wheel 4: 8 mm Tubes for wing struts 5: Non flamable thermocole spary paint
This technique of 3D printing the wing ribs to hold a true aerofoil shape worked out super well! Combined with foam sheets, packing tape and the lightweight wooden spar, it performs amazingly well!