Finally got a big space near Basundhara at police training ground. My very first experience in flying rc plane.
For the Power Pack I used 30A ESC, 1000KV motor, and DIY 18650 3cell Li-ion Battery pack. The cell was from a dead laptop battery that`s why it did not give constant power due to its high internal resistance. The voltage dropped from 12v to 8v at full throttle gradually affecting the rpm of BL motor.
This airplane was made of 5mm and 10mm depron foam , balsa wood and plywood, carbon fiber rods for the wings mount , white vinyl and all the stickers were cut in a plotter machine
This article describes my building plan and steps. I've got many requests to declare the PDF Plan after sharing my images. I have made 2 units of this design and the first one flew good. ...
