VIRGIN ATLANTIC AIRBUS A330-300 BUILD VIDEO -RC AIRLINER AIRPLANE
this airplane was made of 5mm and 10mm depron foam , balsa wood and plywood, carbon fiber rods for the wings mount ,
white vinyl and all the stickers were cut in a plotter machine .
scale 1/20
wingspan 2.94 m
fuselage 3.0 m
flight time with 5000 mAh batteries 6 minutes
it took 20 days to build
components :
- two castle (120AMP) electric speed controls. or but not recommended for this airplane
- two 90mm EDF 1800w 1450 kv brushless outrunner motors 11 blades. or or
- servos -- 9 and 13 gram :
- custom made retractable landing gear. `````` `````````
- 12 volts LED`s for the night flying and navigation lights powered by separated 3 cell lipo battery.
- 9 channels spektrum receiver with long range antenna powered by separated 2 cell lipo battery.
- 3 Aixs gyro.
- two 6 cell 5000 mah lipo batteries.
depron foam board:
amazon.com
amazon.de
Ebay.de
you can find most of your RC parts and cheaper than anywhere else here:
music by NCS gaming music
this airplane is available for sale in Dubai ;)
don`t forget to share my videos to support my channel and subscribe to see my new planes ;)
Subscribe here ➡
⬇️my affiliate websites⬇️
Banggood.com :
if you buy some RC parts or anything from these links you`ll support me with some points :D so thanks for your support
How do you get that stick time while quarantined indoors? Mobula 6 is the answer! A small 65mm fpv whoop that weights only 20g, can safely fly indoors and in small outdoors spaces
Ok, so I am going to take one last jaunt into the 3D printing arena here in association with Eclipson Airplanes regarding finding the best material to print your aircraft
