Melusine - A 3D printable electric glider and FPV platform.
My first 3D printable airplane design.
Sorry about the low contrast and high flying. It was overcast and very gusty and I actually had problems getting the plane down at first. I don`t like flying in that area because of the difficult winds.
It is designed as a glider and FPV platform, with interchangeable nose pieces for using gimbals or mounting cameras directly to the nose. It also has an optional printable tricycle landing gear witha steerable nose wheel. It will fly very long on a single charge.
About the plane: Plane weight 310 grms, Motor 2600 KV, Prop 6 inch (use of prop saver recommended) , Wing span 95 cm, Chord length 16 cm, Battery 360 mAh 7~8 Volt Lipo battery (you can use 1000...
