Free plans for Cessna 3D printed

This model aircraft is designed for ePLA-LW testing.

CG 1/3 of the front edge of the wing.

ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature.

Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA.

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.

Electronics:



Motor 1806 2300Kv BangGood, AliExpress 5045 Prop BangGood, AliExpress Esc 20A Bec BangGood, AliExpress 3S 450Mah Lipo BangGood, AliExpress 4.8G Servo BangGood, AliExpress Esun® Epla BangGood, AliExpress