Replica of an A380 from THAI Airways in 1/13 scale After a long construction period, the time had finally come. The first flight for the technical acceptance could take place. Rainer Kamitz was at the sticks and did an impressive flight.
Builder and owner: Christopher Ferkl from Austria Scale 1/13 Span: 6.13m / 20 feet Length: 5.60 m / 18.5 feet Weight: 102.7 kg / 226 pounds Turbine: 4 x JetsMunt 166 ...
Fuel capaticy: 12 liters / 2.2 gallons (UK) Fuel tanks from CMJETS Landing gears: Electron with homemade gears TX: Futaba T18MZ RX: 2 x Futaba 7008SB Servos: KST 2 x Aileron 2 x Elevator 1 x Rudder 4 x Landing flaps 1 x Front gear 8 x Gear doors Electronic control unit: Powerbox Royal Time to build 3 years / 1700 hours
About the plane: Plane weight 310 grms, Motor 2600 KV, Prop 6 inch (use of prop saver recommended) , Wing span 95 cm, Chord length 16 cm, Battery 360 mAh 7~8 Volt Lipo battery (you can use 1000...
