How to Make Piper Cherokee RC plane (DIY)

Piper Cherokee is a private and trainer plane. Made by Piper Aircraft. first flight in 1960. It still in production until now with variants Arrow, Archer and Warrior. This plane is very stable and easy for handling. I made an RC plane of it in semi scale model. I made its wing longer than the real one. The front wheel it`s not steerable but don`t worry you can still steer it on the ground with rudder.

• You can download the plans here: http://rc-plans.com/catalog/item194.html

Playlist :
02:29 Plans preparatiom
03:53 Fuselage
17:52 Wing
27:18 Servo and Pushrods
29:56 Landing Gear
33:24 Maiden
40:04 Review

Specification
1. Wingspan 115 cm / 45.3 inches
2. Flying weight 750 gram - 26.5 oz
3. Wing loading 36.6 gram/dm2 - 12 oz/sq.ft
4. Wing cube loading 8.1
5. Wing Area20.5 dm2 - 318 sq.in

Electronics :
1. Motor with 1400-1000kv
2. ESC : 30A
use for testing ::
- Turnigy 2830 1000kv motor
- ESC 40A
- Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 2 metal gear 9 gram servos
- 2 plastic gear 9 gram servos
- Propeller : 9x4x3

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood
3. 0.3mm Mica Plastic
4. 2.5mm wire / wheel spoke
5. ice cream sticks
6. 3 x 40 cm 1mm wire pushrod
7. Packing Tape

Free RC plane

Similar articles:

"How To" Video → DIY Own RC Airliner Engine Nacelles!

"How To" Video → how to fiberglass a RC airplane

"How To" Video → Making an RC airplane canopy (without a vacuum former)

"How To" Video → How To make a canopy

"How To" Video → How to make quadcopter at home very easy By RK

RTF Volantex P-51D 750mm unboxing 768-1 RC plane warbird review