It had to be done after my previous video! I will let the video explain the rest. The aircraft was printed from clear PLA filament with a 0.4mm nozzle at 220 degree Celsius to maximise the layer strength. All up weight of the aircraft was 730g in the end!
In this video, we are going to make a cardboard airplane (glider) properly, we are going to use techniques used in RC airplanes builds but using cardboard
With a wind speed of 30 mph plus on the top of the hill, I just had to fly the Ron Broughton designed Balistik, a 60" chevron wing designed for EPP60 man on man racing
Gotta Know Joe Hobbies in Spring Tx Proving that R/C airplanes do not need to be expensive This plane was found and rescued from a hot damp old Conex storage container
